金属结构产品及附件CE认证知识大全 2014-09-12 属结构产品及附件属于欧盟CE认证CPR指令 (建筑产品指令 EU/305/2011 Regulation (EU) No 305/2011 – Construction products），欧盟规定如下4大类12个品种的金属结构产品在CE认证强制范围内。这篇金属结构产品及附件CE认证大全是欧测结合多年研究成果和数百家认证案例总结得出，全面覆盖了欧盟CE范围内的金属结构产品及其附件认证要求。 Decision Product family, product /Intended use AVCP system Technical specification Body function 98/214/EC Structural metallic products and ancillaries (1/4) :• Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures) System 2+ EN 10025-1:2004EN 10088-4:2009EN 10088-5:2009EN 10210-1:2006EN 10219-1:2006EN 10340:2007EN 10340:2007/AC:2008EN 10343:2009EN 15048-1:2007EN 15088:2005 FPC Certification Body 98/214/EC Structural metallic products and ancillaries (2/4) :• Structural metallic construction members: finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work’s frames and foundations) System 2+ EN 1090-1:2009+A1:2011 FPC Certification Body 98/214/EC Structural metallic products and ancillaries (3/4) :• Welding materials (for uses in structural metallic works) System 2+ EN 13479:2004 FPC Certification Body 98/214/EC Structural metallic products and ancillaries (4/4) :• Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works) System 2+ EN 14399-1:2005 FPC Certification Body 12类认证产品 1. EN 10025-1:2004热轧结构钢产品第1部分一般交货技术条件 Hot rolled products of structural steels – Part 1: General technical delivery conditions 2. EN 10088-4:2009不锈钢 第4部分：交货技术条件 板材板及耐腐蚀的建筑钢材地带用途 Stainless steels – Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes 3. EN 10088-5:2009不锈钢.第5部分:建筑用棒材,杆材,线材,型材和光亮耐腐蚀钢的技术交付条件 Stainless steels – Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes 4. EN 10210-1:2006 非合金及细晶粒结构钢热成型结构管(空心材)—— 第一部分:交货技术要求 Hot finished structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions 5. EN 10219-1:2006精粒结构钢和非合金冷型焊接结构型材 技术提交 Cold formed welded structural hollow sections of non-alloy and fine grain steels – Part 1: Technical delivery conditions 6. EN 10340:2007/AC:2008结构用钢铸件 EN 10340:2007/AC:2008 Steel casting for structural uses 7. EN 10343:2009建筑用淬火和回火钢.技术交货条件 Steels for quenching and tempering for construction purposes – Technical delivery conditions 8. EN 15048-1:2007非预加载荷结构的螺栓连接组件.第1部分:一般要求 Non-preloaded structural bolting assemblies – Part 1: General requirements 9. EN 15088:2005铝及铝合金-施工作业用结构产品-检验和供货技术条件 Aluminium and aluminium alloys – Structural products for construction works – Technical conditions for inspection and delivery 10. EN 1090-1:2009+A1:2011钢结构和铝结构-第一部分:结构部件一致性评估基本要求 Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components 11. EN 13479:2004 焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准 Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials 12. EN 14399-1:2005预加负荷用高强度结构螺栓组件.第1部分:一般要求 High-strength structural bolting assemblies for preloading – Part 1: General requirements 欧测是全球顶尖的专业国际产品认证公司，拥有完善的认证服务体系和丰富的认证经验，专注于石油石化、机械设备、建筑材料全球认证服务。欧测在其所涉足的认证领域，总是能快速、准确的满足客户出口认证需求，解决认证难题，清除国际贸易认证壁垒。在中国一带一路发展战略中，为制造商提供了满足各国标准和认证法规的强大支持和保障。 返回
